- High - performance digital synthesizer
- Measure wide frequency : 9 kHz ~ 6.2 GHz
- Superior Resolution : Minimum 1 Hz
- Compact and Portable size
- Wide input Dynamic Range : -105 dBm ~ 20 dBm
- Easy and simple Key Buttons
- CDMA measurement functions : ACPR, ACLR, OCBW, Channel Power
- Various and Convenient Interfaces : USB , LAN
- 0.5 ppm high precision reference
- High definition 640 x 480 color TFT LCD
| TECHNICAL SPECCIFICATION |
| Frequency |
- Range : 9 kHz to 6.2 GHz
- Resolution : Minimum 1 Hz
- Span Range : 100 Hz/div to 600 MHz/div , Selection of 1, 2, 5 steps(automatic), ZERO Span, Full Span ( 9 kHz to 6.2 GHz)
- Frequency Selection : Start, Stop, Center, Span setup
- Span Accuracy : +/-3% of the Indicated Span Width
- Readout Accuracy : <= ± (Indicated frequency x Reference frequency accuracy + Span x Span accuracy + 50% of RBW)
|
| Amplitude |
- Range : +20 dBm ~ -105 dBm
- Phase Noise : <=-90dBc/Hz (@ 10kHz offset)
- Average Noise Level (1kHz RBW, 10Hz VBW)
< = -105 dBm 150 kHz ~ 2.7 GHz
< = -100 dBm, 2.7 MHz ~ 6.2 GHz
- Amplitude Unit : dBm, dBmv, dBuV, V, mV, uV, W, mW, uW
- Display Scale linearity
< = ±1.5 dB / 70dB (10dB/div),
< = ±1.5 dB / 40dB (5dB/div),
< = ±0.5 dB / 8dB (1dB/div),
< = ±0.5 dB / 16dB (2dB/div)
- Frequency Response (Based on 0 dB attnuation) : -3.5 ~ 1.5 dB (100 kHz ~ 10MHz) ±1.5 dB (10MHz ~ 6.2 GHz)
- Reference Level
Range : 20 dBm to -90 dBm ]
Resolution : 0.1 dB steps
Accuracy : ±1.5 dB
- Second Harmonic Distortion : <= -60 dBc, -40 dBm input
- Inter modulation Distortion : <= -70 dBc, -40 dBm input
- Residual Spurious : <= -85 dBm (Input terminated, 0 dB attenuation)
- Other Input Spurious : <= -60 dBc, -30 dBm input
- Resolution Bandwidth
Selections : 1kHz , 3kHz , 10kHz, 30kHz, 100kHz, 1 MHz , 3 MHz, 9kHz, 120kHz
Accuracy : <= ±20%
Selectivity : 60 dB / 3 dB ratio < 15:1
60 dB / 6 dB ratio < 12 : 1 (9 kHz, 120 kHz)
Switching Error : <= ±1.0 dB (1kHz Reference RBW)
Video Bandwidth : 10 Hz to 3 MHz in 1-3-10 steps |
| SWEEP |
- Rate : 100 ms to 1000 sec, 40 ms to 1000 sec (Zero Span)
- Accuracy : <= ±20%
- Trigger Source : External (rear) , Video , Free Run , Line
- Trigger Modes : Continuous, Single
- Trigger Level : TTL Level
|
| Memory |
- Trace Storage : maximum 900 waveforms
- Setup Storage : maximum 3,000 states
|
| Screen Display |
- Type : 6.4" color TFT LCD
- Display Resolution : 640(H) x 480 (V) active display area
- Marker Modes : Peak search , Delta marker, Marker to Center, Marker to Reference (8 Markers maximum)
|
| Input |
- RF Input Connector : N-type Female , 50 ohm nominal
- VSWR : 150 kHz to 3.0 GHz, VSWR < 1.5 : 1(with 0 dBm Reference Level) , 3.0 GHz to 6.2 GHz, VSWR < 2 : 1(with 0 dBm Reference Level) typical <1.5 : 1
- Maximum input level : 50 Vdc, +20 dBm
|
| Standard Frequency (10MHz, Ref.) |
- Temperature Stability : ±0.5 ppm
- Aging : ±0.5 ppm/Year
- Connector : BNC female
- Input Level : -5 dBm to +15 dBm
- Output Level : 10 MHz, +8 dBm nominal
|
| Interface |
- RS-232C Null Modem for Remote Control
- Printer
Driver : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet
Connector : for standard 25 pin female D-Sub parallel connector
Printer Driver : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet
USB Storage Device : Support 1.1 and 2.0 for storing image file, supports GIF format
- Ethernet (Option) : 10-Base-T Ethernet remote control
- GPIB Interface(Option) : IEEE488 bus
|
| GENERAL SPECIFICATIONS |
- Dimentions : 350(W) x 195(H) x 375(D) mm
- System Weight : 10 kg
- Warming up Time : 20 minutes for the precision measurement
- Power
Source Voltage and frequency : 100 ~ 240 VAC at 50/60 Hz
Power Consumption : 80 Watts maximum without option
- Operating Temperature : 0 C to 40 C
- Storage Temperature : -20 C to 70 C
- RF emissions : EN 55011, FCC PART15 Section 15.101
- RF Immunity : EN 61326
|
- Power Cord
- Operating Manual
- GPIB Interface (IEEE 488 Bus)
- ETHERNET Interface ; for Internet Remote Control
- Soft Carrying Case
- General KIT Set
- CATV KIT Set
|
